Sharp M751 Installation Manual - NEC

Sharp M751 Manual

Get Sharp M751 PDF manuals and user guides View all Sharp M751 manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp M751 manual content summary:

  • Sharp M751 | Installation Manual - NEC - Page 1
    NEC Display Solutions of America, Inc. MultiSync™ M751 Large Format Installation Guide [Ver.1.0] Contents: -by step procedure for installation. • Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local building codes. All
  • Sharp M751 | Installation Manual - NEC - Page 2
    should appear on the display notating the correct direction. Face Up orientation is supported for these models only if the fan setting is on HIGH and if the into the design. Contact NEC for design review and recommendations. www.necdisplay.com MultiSync M751 Large Format Displays Page 2 of 12
  • Sharp M751 | Installation Manual - NEC - Page 3
    Display Dimensions - M751: NEC Display Solutions of America, Inc. www.necdisplay.com MultiSync M751 Large Format Displays Page 3 of 12
  • Sharp M751 | Installation Manual - NEC - Page 4
    Display Dimensions - P435 cont'd: NEC Display Solutions of America, Inc. NEC strongly recommends using size M8 screws (16 - 18mm + the thickness of the bracket and washers in length). www.necdisplay.com MultiSync M751 Large Format Displays Page 4 of 12
  • Sharp M751 | Installation Manual - NEC - Page 5
    Removing the Optional Table Top Stand • The M751 uses the ST-801 stand • Only use the screws that are included with the optional stand. NEC Display Solutions of America, Inc. Table Top Stand Dimensions (ST-801 pictured below): www.necdisplay.com MultiSync M751 Large Format Displays Page 5 of 12
  • Sharp M751 | Installation Manual - NEC - Page 6
    Optional Large Wall Mount (WMK-7598T): NEC Display Solutions of America, Inc. www.necdisplay.com MultiSync M751 Large Format Displays Page 6 of 12
  • Sharp M751 | Installation Manual - NEC - Page 7
    Optional Speaker Dimensions (SP-RM3): NEC Display Solutions of America, Inc. www.necdisplay.com MultiSync M751 Large Format Displays Page 7 of 12
  • Sharp M751 | Installation Manual - NEC - Page 8
    NEC Display Solutions of America, Inc. Intel® Smart Display Module Integration: 1. Place the monitor face down on a flat even surface that is larger than the monitor screen. Use a sturdy table that can easily support if necessary www.necdisplay.com MultiSync M751 Large Format Displays Page 8 of 12
  • Sharp M751 | Installation Manual - NEC - Page 9
    see separate MPi4E installation guide for full integration. Image below may not represent actual back of unit but the concept is the same. • Removing the OPTION COVER is necessary for installation Final installed MPi4E or MPi4W below www.necdisplay.com MultiSync M751 Large Format Displays Page
  • Sharp M751 | Installation Manual - NEC - Page 10
    Input Panel: Bottom Side (Rotated) NEC Display Solutions of America, Inc. www.necdisplay.com MultiSync M751 Large Format Displays Page 10 of 12
  • Sharp M751 | Installation Manual - NEC - Page 11
    of America, Inc. ASCII Common Commands: • This monitor supports common ASCII control commands with many other NEC projectors. For more information on this, please see our website. ://www.sharpnecdisplays.us/faqs/pdcommstool/179 www.necdisplay.com MultiSync M751 Large Format Displays Page 11 of 12
  • Sharp M751 | Installation Manual - NEC - Page 12
    Code: RS-232C Asynchronous 9600 bps 8 bits 1 bit ASCII NEC Display Solutions of America, Inc. Interface: Communication System: Communication Layer of the box unless changed through the initial setup guide Communicating network PC needs to be on the same subnet as display that
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
NEC Display Solutions of America, Inc.
MultiSync™ M751 Large Format Installation Guide
[Ver.1.0]
www.necdisplay.com
MultiSync M751 Large Format Displays
Page 1 of 12
Contents:
Product Description and Notes
Page 1
Rotation
Page 1
Ventilation Recommendations
Page 2
Display Dimensions
Pages 3-8
Optional Stand Dimensions
Page 9
Optional Wall Mount Dimensions
Page 10
Optional Speaker Dimensions
Page 11
Intel® Smart Display Module Integration
Page 12
Compute Module Integration
Page 13
Input Panel
Page 14
ASCII Commands
Page 15
PD Comms Tool
Page 15
Cable Connection
Page 16
Browser Control
Page 16
Product Description:
Type:
LCD Display
Resolution:
3840 x 2160
Aspect Ratio:
16:9
EMI:
Class B
*Absolute Max refers to when the display is at full brightness with all slots active and volume at 100.
NOTES:
•
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to be
a step-by step procedure for installation.
•
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
•
Distances are in inches, for millimeters multiply by 25.4. Distances may vary ±5%.