Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 103

7 8 Holes to be cleaned BEFORE USING THE MACHINE Clean the laser unit. (1) Point the cleaner down and slowly insert the tool into the hole that you wish to clean. Be sure to point the cleaner down. (A) Labels similar to (A) are attached to areas that require cleaning. (2) Insert the cleaning tool all the way into the hole and then pull it back out. Pull the cleaning tool out until you feel the tip of the tool leave the cleaning surface of the laser unit. (3) Repeat step (2) two or three times and then remove the cleaning tool. Repeat step 7 to clean all holes in the laser unit (4 holes). There are a total of 4 holes to be cleaned in the laser unit, including the hole cleaned in step 7. Clean all holes. 1-62 Contents