Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 133

COPIER (1) 2-Sided Copy 3 (2) Select the 2-sided copy mode. OK (1) Touch the [1-Sided to 2-Sided] key. (2) Touch the [OK] key. Binding Change The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass. Color Mode Full Color Special Modes 2-Sided Copy Check the paper to be used and the color mode. Plain 8½x11 Output Make sure that the desired paper (tray) and color mode are Exposure 1. 8½x11 selected. 2. 8½x11R Auto 3. 8½x14 File • To change the paper (tray), touch the [Paper Select] key. 4 Copy Ratio 4. 11x17 Original Paper Select Quick File ☞PAPER TRAYS (page 2-11) • To change the color mode, touch the [Color Mode] key. 100% Auto Auto ☞COPY COLOR MODES (page 2-21) 8½x11 8½x11 Plain Depending on the size of the placed original, there may be cases where the same size of paper as the original is not selected automatically. In this event, change the paper size manually. 7 Special Modes Set the number of copies (number of sets) with the numeric keys. 2-Sided Copy Plain 5 8½ 11 • Up to 999 copies (sets) can be set. • A single copy can be made even if "0" appears for the number of copies. If an incorrect number of copies is set... Press the [CLEAR] key ( ) and then enter the correct number. 6 Press the [COLOR START] key or the [BLACK & WHITE START] key. Scanning begins. Remove the original and place the next original, and then press the [COLOR 7 START] key or the [BLACK & WHITE START] key. Repeat this step until all originals have been scanned. For the second original and following originals, use the same [START] key as you did for the first original. 2-19 Contents