Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 153

COPIER MAKING COPIES USING THE BYPASS TRAY In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, tab paper, and other special media. For detailed information on paper that can be loaded in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER" (page 1-27) in "1. BEFORE USING THE MACHINE". For precautions when loading paper in the bypass tray, see "LOADING PAPER IN THE BYPASS TRAY" (page 1-34) in "1. BEFORE USING THE MACHINE". Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 1 1 When placing the originals on the document glass... After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be copied black, causing excessive use of toner. Place paper in the bypass tray. Insert the paper with print side face down. However, if the paper type is "Letter Head" or "Pre-Printed", load the paper with the print side face up*. * If "Disabling of Duplex" is enabled in the system settings (administrator), load the paper in the normal way (face up in trays 1 to 5; face down in the bypass tray). 2 When loading paper larger than 8-1/2" x 11"R or A4R, be sure to pull out the bypass tray extension. Pull the bypass tray extension all the way out. If the bypass tray extension is not pulled all the way out, the size of the loaded paper will not be correctly displayed. Color Mode Full Color Exposure Auto 3 1. 8½x11 2. 8½x11R 3. 8½x14 4. 11x17 Plain 8½x11 Special Modes 2-Sided Copy Output File Quick File Touch the [Paper Select] key. Copy Ratio 100% Original Auto 8½x11 Paper Select Auto 8½x11 Plain 2-39 Contents