Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 179

COPIER 6 Special Modes Covers/Inserts Cover Setting Front Cover Back Cover OK Cancel OK Inserts Setting Insertion Type A Insertion Type B Insertion Settings Tray Settings Page Layout Touch the [Insertion Settings] key. (1) (2) (5) Covers/Inserts Insertion Settings OK Insertion Type A Tray 1 8½x11 Plain Insertion Type B Bypass Tray 8½x11 Plain Insertion Page 10 Enter Insertion Total:4 (A) (B) (3) (C) 7 Specify the pages where inserts A and B will be inserted. (1) Touch the [Insertion Type A] key or the [Insertion Type B] key. Specify the page where the highlighted insert will be inserted. (A) This shows the tray selected for insert type A and the paper size and type. (B) This shows the tray selected for insert type B and the paper size and type. When the [Insertion Type A] key is highlighted, the insert sheet insertion settings are applied to [Insertion Type A]. When the [Insertion Type B] key is highlighted, the insert settings are applied to [Insertion Type B]. (2) Enter the page number where the insert sheet will be inserted with the numeric keys. For more information, see "Inserts (copying of 1-sided originals)" (page 2-150) and "Inserts (copying of 2-sided originals)" (page 2-150). The [CLEAR] key ( ) can be pressed to return the setting of the selected item to the default value. If you make a mistake, press the [CLEAR] key ( ) and then enter the correct number. (3) Touch the [Enter] key. (C) This shows the total number of inserts. Up to 100 insert sheets can be inserted. To insert multiple inserts, touch the [Enter] key after entering each insertion page number (insertion position) with the numeric keys. (4) To insert another insert sheet, repeat steps (1) to (3). (5) Touch the [OK] key. If both sides of the insert will be copied on, label sheets, transparency film, and tab paper cannot be used. If not copied on, tab paper can be inserted. 2-65 Contents