Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 225

COPIER COPYING IN THE CENTER OF THE PAPER (Centering) This is used to center the copied image on the paper. This lets you place the image in the center of the paper when the original size is smaller than the paper size or when the image is reduced. Not using the centering function Using the centering function 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Select the special modes. (1) Touch the [Special Modes] key. 2 (2) Touch the keys to switch through the screens. (3) Touch the [Image Edit] key. ☞ [Image Edit] KEY (page 2-102) (1) (2) Special Modes OK Image Edit OK 3 Photo Repeat 11x17 Full Bleed Multi-Page Enlargement Centering Mirror Image B/W Reverse Select Centering. (1) Touch the [Centering] key so that it is highlighted. (2) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. Press the [COLOR START] key or the [BLACK & WHITE START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then 4 touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original. To cancel scanning and copying... Press the [STOP] key ( ). 2-111 Contents