Home » Sharp Manuals » Multifunction Devices » Sharp MX-2600N » Manual Viewer

Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 235

Adjust the color balance., Press the [COLOR START] key.

Add to My Manuals
Save this manual to your list of manuals

Page 235 highlights

COPIER (1) (2), (3) (5) Color Adjustments Color Balance OK Cancel OK Y 1 2 3 4 5 6 7 8 All M C Bk Examples of color balance adjustment 3 The settings of all gradations are moved toward + The settings of all gradations are moved toward - Adjust the color balance. (1) Select the color to be adjusted. Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] (black). If only the rectangular area around the letter in a key is highlighted, the settings have been changed from the factory default settings. (2) Select the gradation to be adjusted. Select the gradation with the keys. Touch the keys to move the highlighting to one of gradations "1" to "8" or "All". To adjust all eight gradations at once, move the highlighting to "All". (3) Adjust the density. To darken the density of the selected gradation, touch the [+] key. To lighten the density, touch the [-] key. Each time one of the keys is touched, the indicator frame moves up or down one level. (4) To adjust other colors, repeat steps (1) to (3). (5) Touch the [OK] key. You will return to the special modes screen. Touch the [OK] key to return to the base screen of copy mode. To return the color balance values to the default settings... Touch the key. The values of all eight gradations will return to the default color balance values. The default color balance values are set in "Initial Color Balance Setting" in the system settings (administrator). Press the [COLOR START] key. Copying will begin. If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 4 have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). To cancel a color balance setting... Touch the [Cancel] key in the screen of step 3. System Settings (Administrator): Initial Color Balance Setting This is used to set the default values to which the color balance values return when the key is pressed. 2-121 Contents

Section	Page
BEFORE USING THE MACHINE	42
COPIER	115
PRINTER	265
FACSIMILE	342
SCANNER/INTERNET FAX	474
DOCUMENT FILING	596
SYSTEM SETTINGS	647

Match case Limit results 1 per page

2-121

COPIER

Contents

Examples of color balance adjustment

Adjust the color balance.

(1)

Select the color to be adjusted.

Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] (black).

If only the rectangular area around the letter in a key is

highlighted, the settings have been changed from the

factory default settings.

(2)

Select the gradation to be adjusted.

Select the gradation with the

keys.

Touch the

keys to move the highlighting to one of

gradations "1" to "8" or "All".

To adjust all eight gradations at once, move the

highlighting to "All".

(3)

Adjust the density.

To darken the density of the selected gradation, touch the

[+] key. To lighten the density, touch the [-] key. Each time

one of the keys is touched, the indicator frame moves up

or down one level.

(4)

To adjust other colors, repeat steps (1) to (3).

(5)

Touch the [OK] key.

You will return to the special modes screen. Touch the

[OK] key to return to the base screen of copy mode.

To return the color balance values to the default settings...

Touch the

key. The values of all eight gradations will return to the default color balance values.

The default color balance values are set in "Initial Color Balance Setting" in the system settings (administrator).

Press the [COLOR START] key.

Copying will begin.

If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you

have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned

and then touch the [Read-End] key.

To cancel scanning and copying...

Press the [STOP] key (

To cancel a color balance setting...

Touch the [Cancel] key in the screen of step 3.

System Settings (Administrator): Initial Color Balance Setting

This is used to set the default values to which the color balance values return when the

key is pressed.

Cancel

Color Adjustments

Color Balance

All

(1)

(2), (3)

(5)

The settings of all gradations

are moved toward +

The settings of all gradations

are moved toward -