Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 366

FACSIMILE BASIC TRANSMISSION METHODS This section explains the basic procedures for sending a fax. TRANSMISSION METHODS The methods that can be used to send a fax from the machine are explained below. Select the method that best suits your needs. To fax a large number of sheet originals, use the automatic document feeder. The originals will be scanned into memory and then transmitted (memory transmission). When memory transmission is selected and multiple originals are placed in the automatic document feeder (and the line is free), transmission will begin as soon as the first page is scanned and will take place while the remaining pages are being scanned (Quick Online transmission). If transmission cannot begin immediately because the line is in use, all pages will be scanned into memory and the transmission will be reserved. ☞ USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION (page 4-31) When a fax transmission or reception is already in progress, the following procedure can be performed to reserve a transmission job. To check reserved transmission jobs, display the job status screen. ☞ CHECKING THE STATUS OF FAX JOBS (page 4-122) 11111 Transmission 11111 1 • If memory becomes full while the first original page is being scanned, transmission will stop. • In the following situations, the transmission will be automatically reserved (memory transmission) - When the line is busy or a communication error occurs and automatic resending is enabled. ☞ WHEN THE LINE IS BUSY (page 4-29), WHEN A COMMUNICATION ERROR OCCURS (page 4-29) - The machine is already using the line to send or receive a fax. - Another fax transmission was reserved ahead of your fax. - One of the following functions is being used for transmission. Broadcast transmission, F-code transmission, timer transmission, Dual Page Scan, 2in1, Card Shot, Job Build, Original Count - The document glass is being used (except when the speaker is being used to dial). • Up to 94 transmission jobs can be reserved. • When the transmission is finished, the scanned original pages are cleared from memory. However, when the document filing function is used, the transmitted fax is stored. System Settings (Administrator): Quick On Line Sending This is used to disable Quick Online transmission. In this case, fax transmissions will be sent by memory transmission (reserved and then transmitted). 4-25 Contents