Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 368

FACSIMILE PLACEMENT ORIENTATION OF THE ORIGINAL When an 8-1/2" x 11" (A4) original is placed in vertical orientation ( ), the image is automatically rotated 90 degrees and transmitted in horizontal orientation ( ) (Rotation Sending). If the original is placed in horizontal orientation ( ), it is transmitted in that orientation ( ) without being rotated. Transmission 8-1/2" x 11"(A4) Rotated to 8-1/2" x 11"R (A4R) orientation 8-1/2" x 11"R (A4R) image is transmitted. 8-1/2" x 11"R and 5-1/2" x 8-1/2" (A4R, B5 and A5) size originals are not rotated for transmission. System Settings (Administrator): Rotation Sending Setting The factory default setting is rotate before transmission. If this setting is disabled, the original will be transmitted in the orientation in which it is placed. AUTOMATIC REDUCTION OF THE TRANSMITTED IMAGE If the width of the transmitted image is larger than the width of the paper in the receiving machine, the image will be automatically reduced to fit the receiving machine's paper width. Example: Reduced sizes and reduction ratios Transmitted image width Receiving machine's paper width A3 B4 11" x 17" (A3) 8-1/2" x 14", 8-1/2" x 11" (A4) B4 A4 Reduced size B4 8-1/2" x 14", 8-1/2" x 11"R (A4R) A4R Ratio 1 : 0.84 1 : 0.71 1 : 0.84 System Settings (Administrator): Auto Reduction Sending Setting The factory default setting is automatic reduction enabled. If this setting is disabled, the image will be sent at full size and part of the image may be cut off. 4-27 Contents