Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 401

FACSIMILE CHECKING THE IMAGE BEFORE PRINTING When "Received Data Image Check Setting" is enabled* in the system settings (administrator), you can check a received image in the touch panel before printing it out. When this function is enabled, follow the steps below to print a received image. * The factory default setting is disabled. The maximum size (height) of images that can be checked on the touch panel is 19-3/16" (487 mm). When an image is received, a The memory has received data. Check the data? confirmation prompt will appear. Touch the [Yes] key. 1 No Yes If this message appears while you are configuring settings of any type and you touch the [Yes] key, the settings that you are configuring will be cancelled. If this message appears in another mode, you will return to the base screen of image send mode after checking the image. 2 Received Data List Thumbnail 0123456789 BBB BBB 9876543210 B0B6B12B3B4B5678 B0B1B23B4B5B6789 CCC CCC Image Check (2) (1) Back Select All 04/04/2010 10:28 Not checked 04/04/2010 10:14 Checked 1 04/04/2010 10:12 Not checked 5 04/04/2010 10:08 Checked 04/04/2010 10:00 Not checked 04/04/2010 10:00 Checked Delete Print Select the received image (1) Touch the key of the received image that you want to check. Multiple received images can be checked. (2) Touch the [Image Check] key. • To show thumbnails of the received images, touch the [Thumbnail] key. • To delete an image that has been selected, touch the [Delete] key. To print an image that has been selected, touch the [Print] key. Image Check 0123456789 04/04/2010 10:28 3 0001 /0010 Back 1 / 3 Display Rotation Check the received image and then touch the [Print] key. Printing begins. For information on the image check screen, see "IMAGE CHECK SCREEN" (page 4-61). Print If the screen of step 1 appears when you are configuring settings in the setting screens of any of the modes, the configured settings will be cancelled if you view the image. After viewing the image, you will return to the base screen of image send mode, regardless of which mode you were in previously. System Settings (Administrator): Received Data Image Check Setting Use this to specify whether or not a received fax can be viewed before it is printed. 4-60 Contents