Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 44

BEFORE USING THE MACHINE BEFORE USING THE MACHINE This section provides basic information about the machine. Please read this chapter before using the machine. PART NAMES AND FUNCTIONS EXTERIOR (1) (2) (3) (4) (5) (6) When a finisher / saddle stitch finisher is not installed (7) When a finisher is installed (1) Automatic document feeder This automatically feeds and scans multiple originals. Both sides of 2-sided originals can be automatically scanned. ☞ PLACING THE ORIGINAL (page 1-37) (2) Front cover Open this cover to switch the main power switch to "On" or "Off" or to replace a toner cartridge. ☞ TURNING THE POWER ON AND OFF (page 1-15) ☞ REPLACING THE TONER CARTRIDGES (page 1-64) (3) Paper pass unit* This transfers output to the saddle stitch finisher. (4) Operation panel This is used to select functions and enter the number of copies. ☞ OPERATION PANEL (page 1-8) * Peripheral device. (5) Exit tray unit (right tray)* When installed, output can be delivered to this tray. (6) Output tray (center tray) Output is delivered to this tray. (7) Finisher* This can be used to staple output. A punch module can also be installed to punch holes in output. ☞ FINISHER (page 1-43) 1-3 Contents