Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 512

SCANNER/INTERNET FAX 3 (1) (2) Scan Internet Fax Address Book Original Address Entry Exposure Fax Scan: Auto USB Mem. Scan PC Scan Auto 8½x11 Send: Auto Send Settings Resolution 200X100dpi Address Review File Format TIFF-F File Special Modes Quick File I-Fax Manual Reception Switch to Internet fax mode and display the image settings screen. (1) Touch the [Internet Fax] tab. (2) Touch the [Original] key. The current settings for [Original], [Exposure], [Resolution], and [File Format] are indicated at the right of each key. To change a setting, touch the appropriate key. ☞ AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) (page 5-51), SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce) (page 5-52), CHANGING THE EXPOSURE AND ORIGINAL IMAGE TYPE (page 5-58), CHANGING THE RESOLUTION (page 5-60), CHANGING THE FILE FORMAT (page 5-61), SPECIAL MODES (page 5-66) (1) (2) Internet Fax/Original OK Scan Size 100% Send Size Auto 8½x11 Auto 4 2-Sided Booklet 2-Sided Tablet Image Orientation Specify the orientation in which the original is placed. When specifying the orientation of the image to be transmitted, specify the orientation of the original placed in step 1. (1) Touch the appropriate orientation key. If the top edge of the original is up, touch the key. If the top edge of the original is to the left, touch the key. (2) Touch the [OK] key. You will return to the screen of step 2. The original orientation is initially set to necessary. . If the original was placed with the top edge up, this step is not Press the [BLACK & WHITE START] key. Scanning begins. 5 • If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one page, go to step 7. To scan more pages, go to the next step. • If the original was inserted in the document feeder tray, a beep will sound when scanning is completed and transmission will take place. If the original was placed on the document glass, replace it with the next original 6 and press the [BLACK & WHITE START] key. Repeat until all originals have been scanned. 5-39 Contents