Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 526

SCANNER/INTERNET FAX Specifying the original scan size (by paper size) If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original size manually. Place the original in the document feeder tray or on the document glass and follow the steps below. Select the mode and display the image settings screen. (1) Touch the tab of the mode that you wish to use. 1 (2) Touch the [Original] key. The automatically detected original size appears to the right of the [Original] key. ☞ IMAGE SETTINGS (page 5-50) 2 Scan/Original OK Scan Size Auto 8½x11 100% Send Size Auto 2-Sided Booklet 2-Sided Tablet Image Orientation Touch the [Scan Size] key. 3 (1) Scan/Original Auto Manual 5½x8½ 5½x8½R 8½x11 Manual 8½x11R 8½x13(216x330) 8½x14 11x17 Long Size Size Input (2) Specify the scan size. OK (1) Touch the appropriate original size key. (2) Touch the [OK] key. AB Inch • If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long original. The maximum width that can be scanned is 39-3/8" (1000 mm) (the maximum height is 11-5/8" (297 mm)). ☞ TRANSMITTABLE ORIGINAL SIZES (page 5-17) • To specify an AB size for the scan size, touch the [AB Inch] key to highlight the [AB] side and then specify the scan size. 4 Scan/Original OK Scan Size 5½x8½ 100% Send Size Auto 2-Sided Booklet 2-Sided Tablet Image Orientation Touch the [OK] key. When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed. In addition, when only scan destinations are selected for scan transmission or metadata transmission, scanning will take place in Mono2. 5-53 Contents