Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 54

BEFORE USING THE MACHINE SYSTEM BAR The system bar appears at the bottom of the touch panel. The items that appear in the system bar are explained below. Color Mode Full Color Exposure Auto 1. 81/2x11 2.81/2x11R 3. 81/2x14 4. 11x17 Plain 81/2x11 Copy Ratio 100% Copying Original Auto 8½x11 Paper Select Auto 8½x11 Plain Special Modes 2-Sided Copy Output File Quick File (1) (2) MFP Status 020/015 Copying 020/015 Waiting 020/015 Waiting 020/015 Waiting (3) (1) Job status display The job in progress or reserved are indicated by icons. The icons are as follows. Print job Copy job Scan to E-mail job Scan to FTP job Scan to Network Folder job Scan to Desktop job Fax transmission job Fax reception job PC-Fax transmission job Internet fax transmission job (Including Direct SMTP) Internet Fax reception job (Including Direct SMTP) PC-I-Fax transmission job Broadcast job* Inbound routing job Scan to HDD file print job Tandem copy/print job Metadata send job * This appears in a multi-mode broadcast job. When a base screen other than that of image send mode appears, the number of the tray being used to feed paper appears during paper feeding. The color appearing in the job status display depends on the job status as indicated in the table below. The job status display can be touched to show the job status screen. Job status display Machine Configuration Green A print, scan or other job is being executed normally. Yellow The machine is warming up or on standby, or a job is being canceled. Red A paper misfeed or other error condition has occurred. Gray The machine has no jobs. (2) Icon display This icon appears when data is being sent or received. This icon appears when fax, scan, or Internet fax data is stored in the machine's memory. When data to be transmitted is stored, appears. When received data is stored, appears. When both data to be transmitted and received data are stored, appears. This appears when a service technician has activated simulation mode. This appears when a USB memory or other USB device is connected to the machine. This appears when the field support system is being used. 1-13 Contents