Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 543

SCANNER/INTERNET FAX ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase) The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function erases the parts of the image where shadows tend to form. The function does not detect shadows and erase only the shadows.) Scanning a thick book Not using the erase function Using the erase function Shadows appear here Erase modes Edge Erase Center Erase Shadows appear in the image. No shadows appear. Edge + Center Erase Side Erase • Shadows at the edges of the original can also be erased when the automatic document feeder is used. • When using USB memory mode, connect the USB memory device to the machine before performing the procedure below. 1 Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Specify the destination. ☞ ENTERING DESTINATIONS (page 5-18) 2 When scanning to USB memory, there is no need to specify the destination. Go to step 3. Select the special modes. (1) Touch the tab of the mode that you wish to use. 3 (2) Touch the [Special Modes] key. (3) Touch the [Erase] key. ☞ SPECIAL MODES (page 5-66) 5-70 Contents