Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 71

BEFORE USING THE MACHINE TRAY SETTINGS FOR TRAY 1 TO 4 LOADING PAPER AND CHANGING THE PAPER SIZE A maximum of 500 sheets of paper from size 5-1/2" x 8-1/2"R to size 11" x 17" (A5R to A3) can be loaded in trays 1 and 2. A maximum of 500 sheets of paper from size 7-1/4" x 10-1/2"R to size 11" x 17" (B5R to A3) can be loaded in trays 3 and 4. Pull out the paper tray. Gently pull the tray out until it stops. 1 To load paper, go to step 3. To load a different size of paper, go to the next step. A 2 B 3 Adjust the guide plates A and B by squeezing their lock levers and sliding them to match the vertical and horizontal dimensions of the paper to be loaded. The guide plates A and B are slidable. Slide each guide plate while squeezing its lock lever. Fan the paper. Fan the paper well before loading it. If the paper is not fanned, multiple sheets may feed at once and cause a misfeed. Insert the paper into the tray. Load the paper with the print side face up. The stack must not 4 Indicator be higher than the indicator line (maximum of 500 sheets). line 1-30 Contents