Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 768

TROUBLESHOOTING Problem Image rotation does not take place. Two-sided copying does not take place. The paper size of a tray cannot be set. Point to check Did you select the paper size or copy ratio manually? Are you copying using settings that do not allow rotate copying? Is "Rotation Copy Setting" disabled in the system settings (administrator)? Does the paper type setting of the selected tray specify a type of paper that cannot be used for two-sided copying? Are you using a special size or type of paper? Are you copying using settings that do not allow two-sided copying? Have functions been disabled by the administrator? Have functions been disabled by the administrator? Solution Copy using automatic paper selection and automatic ratio selection. Rotate copying can generally be combined with other special modes, however, some combinations are not possible. If a prohibited combination is selected, a message will appear in the touch panel. Check with your administrator. If you are the administrator, enable "Rotation Copy Setting". ➞ System Settings (Administrator) > "Copy Function Settings" > "Other Settings" > "Rotation Copy Setting" > Check "Tray Settings" in the system settings. If the [Disable Duplex] checkbox is selected , two-sided copying using that tray will not be possible. Change the paper type setting to a type that can be used for two-sided printing. ➞ System Settings > "Paper Tray Settings" > "Tray Settings" > "Change" For the paper types and sizes that can be used for two-sided copying, see "SPECIFICATIONS" in the Safety Guide. Two-sided copying can generally be combined with other special modes, however, some combinations are not possible. If a prohibited combination is selected, a message will appear in the touch panel. Some functions may have been disabled in the system settings (administrator). Check with your administrator. When user authentication is enabled, the functions that you can use may be restricted in your user settings. Check with your administrator. Some functions may have been disabled in the system settings (administrator). Check with your administrator. 8-14 Contents