Home » Sharp Manuals » Multifunction Devices » Sharp MX-2600N » Manual Viewer

Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 774

Part of the image is, cut off., The image is upside, down. - driver windows 10

Add to My Manuals
Save this manual to your list of manuals

Page 774 highlights

TROUBLESHOOTING Problem Part of the image is cut off. The image is upside down. Point to check Does the paper size specified by the job match the size of paper loaded in the tray? Solution Make sure that the paper size setting matches the size of paper loaded in the tray. The paper size setting is selected as follows: Windows: On the [Paper] tab of the printer driver. If [Fit to Paper Size] is selected, check the loaded paper and the paper size setting. Macintosh: In the [Page Setup] menu. Is the print orientation setting (portrait or landscape) correct? Set the print orientation to match the image. The print orientation is selected as follows: Windows: On the [Main] tab of the printer driver. Macintosh: In the [Page Setup] menu. Are the margins set correctly in the layout settings of the application? If the edge of the image extends outside the printable area of the machine, the edge will be cut off. Select an appropriate paper size and margins in the layout settings of the application. Are you using a type of paper (tab paper, punch paper, etc.) that can only be loaded in a fixed orientation? When the image size and paper size are the same but the orientations are different, the orientation of the image is automatically rotated to match the paper. However, when the paper can only be loaded in a fixed orientation, this may result in the image being printed upside down. In this event, rotate the image 180 degrees before printing. The 180 degree rotation setting is selected as follows: Windows: On the [Main] tab of the printer driver. Macintosh (OS X v10.3.9 to 10.5.1): On the [Page Setup] menu. (Landscape orientation only.) (In Mac OS 9.0 to 9.2.2, in the [PostScript Options] menu of the [Page Setup] menu.) Is the correct binding position selected for two-sided printing? When two-sided printing is performed, every other page is printed upside down when tablet binding is selected for the binding position. Be sure to set the appropriate binding position. The binding position is selected as follows: Windows: On the [Main] tab of the printer driver. Macintosh: In the [Layout] menu of the print window. (In Mac OS 9.0 to 9.2.2, in [Output/Document Style].) 8-20 Contents

Section	Page
BEFORE USING THE MACHINE	42
COPIER	115
PRINTER	265
FACSIMILE	342
SCANNER/INTERNET FAX	474
DOCUMENT FILING	596
SYSTEM SETTINGS	647

Match case Limit results 1 per page

8-20

TROUBLESHOOTING

Contents

Part of the image is

cut off.

Does the paper size specified by the job

match the size of paper loaded in the

tray?

Make sure that the paper size setting matches the size

of paper loaded in the tray.

The paper size setting is selected as follows:

Windows:

On the [Paper] tab of the printer driver.

If [Fit to Paper Size] is selected, check the loaded

paper and the paper size setting.

Macintosh:

In the [Page Setup] menu.

Is the print orientation setting (portrait or

landscape) correct?

Set the print orientation to match the image.

The print orientation is selected as follows:

Windows: On the [Main] tab of the printer driver.

Macintosh: In the [Page Setup] menu.

Are the margins set correctly in the

layout settings of the application?

If the edge of the image extends outside the printable

area of the machine, the edge will be cut off. Select an

appropriate paper size and margins in the layout

settings of the application.

The image is upside

down.

Are you using a type of paper (tab

paper, punch paper, etc.) that can only

be loaded in a fixed orientation?

When the image size and paper size are the same but

the orientations are different, the orientation of the

image is automatically rotated to match the paper.

However, when the paper can only be loaded in a fixed

orientation, this may result in the image being printed

upside down. In this event, rotate the image 180

degrees before printing.

The 180 degree rotation setting is selected as follows:

Windows:

On the [Main] tab of the printer driver.

Macintosh (OS X v10.3.9 to 10.5.1):

On the [Page Setup] menu. (Landscape orientation

only.)

(In Mac OS 9.0 to 9.2.2, in the [PostScript Options]

menu of the [Page Setup] menu.)

Is the correct binding position selected

for two-sided printing?

When two-sided printing is performed, every other page

is printed upside down when tablet binding is selected

for the binding position. Be sure to set the appropriate

binding position.

The binding position is selected as follows:

Windows:

On the [Main] tab of the printer driver.

Macintosh:

In the [Layout] menu of the print window. (In Mac OS

9.0 to 9.2.2, in [Output/Document Style].)

Problem

Point to check

Solution