Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 78

BEFORE USING THE MACHINE ORIGINALS This section explains how to place originals in the automatic document feeder and on the document glass. PLACING THE ORIGINAL PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER This section explains how to place originals in the automatic document feeder. Allowed original sizes Minimum original size Maximum original size Standard sizes (Minimum size that can be automatically detected) 8-1/2" (height) x 5-1/2" (width) A5: 210 mm (height) x 148 mm (width) Non-standard sizes (Minimum size that can be specified manually) 5-1/8" (height) x 5-1/2" (width) 131 mm (height) x 140 mm (width) Standard sizes (Maximum size that can be automatically detected) 11" (height) x 17" (width) A3: 297 mm (height) x 420 mm (width) 12" x 18" size paper (A3W) cannot be used. Non-standard sizes (Maximum size that can be specified manually) Copy mode: 11-5/8" (height) x 17" (width) 297 mm (height) x 432 mm (width) Image send mode: 11" (height) x 39-3/8" (width) 297 mm (height) x 1000 mm (width) When the original is a non-standard size, see the appropriate explanation below for the mode you are using. ☞ 2. COPIER "SPECIFYING THE ORIGINAL SIZE" (page 2-29) ☞ 4. FACSIMILE "IMAGE SETTINGS" (page 4-45) ☞ 5. SCANNER / INTERNET FAX "IMAGE SETTINGS" (page 5-50) Allowed original weights 1-sided scanning: 9 lbs. to 32 lbs. (35 g/m2 to 128 g/m2) 2-sided scanning: 13 lbs. to 28 lbs. (50 g/m2 to 105 g/m2) To scan originals from 9 lbs. to 14 lbs. (35 g/m2 to 49 g/m2), use "Slow Scan Mode" in the special modes. Scanning without using "Slow Scan Mode" may result in original misfeeds. When "Slow Scan Mode" is selected, automatic 2-sided scanning is not possible. Make sure an original does not remain on the document glass. Open the automatic document feeder, make sure that an 1 original is not on the document glass, and then gently close the automatic document feeder. 1-37 Contents