Sharp MX-2600N MX-2600N MX-3100N Operation Manual - Page 797

TROUBLESHOOTING Problem Stapling does not take place (including pamphlet stapling). Punching does not take place. Point to check Does a message appear instructing you to add staples? Is a different width of paper mixed in? Are there more sheets than can be stapled at once? Is a paper size that cannot be stapled included in the print job? Is the paper type setting of the tray selected in the printer driver set to a paper type that cannot be stapled? Is the paper type setting of the selected paper tray set to heavy paper? Have functions been disabled by the administrator? Does a message appear instructing you to check the punch module? Is a different size of paper mixed in? Is a paper size that cannot be punched included in the print job? Is the tray selected in the printer driver set to a paper type that cannot be punched? Solution Replace the staple cartridge. Do not forget to replace the staple case. ☞ "REMOVING STAPLE JAMS" (page 8-7) Stapling is not possible when paper of different widths are mixed together. To perform mixed size stapling, use paper of the same width and select the [Same Width] setting. When copying, select [Same Width] from [Mixed Size Original] in the special modes. For the maximum number of sheets that can be stapled, see "SPECIFICATIONS" in the Safety Guide. For the paper sizes that can be stapled, see "SPECIFICATIONS" in the Safety Guide. Check the paper type settings in the machine and select a tray that has paper that can be used for stapling*. Click the [Tray Status] button in "Paper Selection" on the [Paper] tab of the printer properties window and check the paper type setting of each tray. * Stapling is not possible on labels, tab paper, transparency film, or envelopes. In addition, if "Disable Staple" is selected in the user type, stapling will not be possible. Pamphlet stapling is not possible on heavy paper. (However, when cover insertion is selected, pamphlet stapling is possible when a single sheet of heavy paper is inserted for use as a cover.) Some functions may have been disabled in the system settings (administrator). Check with your administrator. Dispose of punch scraps. ☞ 1. BEFORE USING THE MACHINE "PUNCH MODULE" (page 1-50) Punching is not possible when different widths of paper are mixed together. To perform mixed size punching, use paper of the same width and select the [Same Width] setting. When copying, select [Same Width] for [Mixed Size Original] in the special modes. For the paper sizes that can be punched, see "SPECIFICATIONS" in the Safety Guide. Check the paper type settings in the machine and select a tray that has paper that can be used for punching*. Click the [Tray Status] button in "Paper Selection" on the [Paper] tab of the printer properties window and check the paper type setting of each tray. * Punching is not possible on labels, tab paper, transparency film, and envelopes. In addition, if "Disable Punch" is selected in the user type, punching will not be possible. 8-43 Contents