Sharp MX-2610N 36US50 Operation Manual
Sharp MX-2610N Manual
 |
View all Sharp MX-2610N manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp MX-2610N manual content summary:
- Sharp MX-2610N | 36US50 Operation Manual - Page 1
H OPERATION MANUAL H As an ENERGY STAR ® Partner, SHARP has determined TV Sound 12 AUDIO ADJUST 13 This operation manual includes basic operating instructions in Spanish and French. SPANISH is on page Service 35 • Calling for Service 35 • Specifications 36 • Limited Warranty 47 A654 WJ 1 - Sharp MX-2610N | 36US50 Operation Manual - Page 2
MANUAL so that you may adjust the picture and color to your personal viewing preference. We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color Television set for years to come. Please read these instructions of the parts, service and labor warranty - Sharp MX-2610N | 36US50 Operation Manual - Page 3
please contact your local authorities or the Electronics Industries Alliance: www.eiae.org CAUTION: basic rules for its installation, use and servicing. 1. Unplug this television equipment from the or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved - Sharp MX-2610N | 36US50 Operation Manual - Page 4
to proper grounding of the mast and supporting structure, grounding of the lead-in wire ) NEC-NATIONAL ELECTRICAL CODE GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART the operating instructions. Adjust only those controls that are covered by the operating instructions as - Sharp MX-2610N | 36US50 Operation Manual - Page 5
Supplied Accessories TV Infrared Remote Control RRMCG1324CESA Size AA Dry Batteries Before Operating Your Television Location • For normal operation, your TV should be located in an area of the room where cool adequate ventilation is provided. Do not place the back of the television set in a - Sharp MX-2610N | 36US50 Operation Manual - Page 6
If this is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method converter/ descrambler (not supplied) Note: • Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might - Sharp MX-2610N | 36US50 Operation Manual - Page 7
Quick Reference Control Operation • Part Names Front Panel POWER Press → On. Press again → Off. VIDEO/AUDIO IN 2 TERMINALS CHANNEL UP/DOWN (a) Selects next higher channel. (s) Selects next lower channel. MENU Press → Accesses MAIN MENU. Press again → Exits MAIN MENU. REMOTE CONTROL SENSOR VOLUME - Sharp MX-2610N | 36US50 Operation Manual - Page 8
will automatically memorize the broadcasting channels. Please perform the following instructions before pressing the POWER button. (1) Insert the batteries into region, please refer to pages 28-30 for more information on manually memorizing the channels using CHANNEL SETTING. • It may be difficult - Sharp MX-2610N | 36US50 Operation Manual - Page 9
MENU on the TV set. • Some features of your TV set are not accessible without the Remote Control. If you lost your Remote Control, contact a Sharp Service Center for a replacement. (On the Set) MENU button 9 - Sharp MX-2610N | 36US50 Operation Manual - Page 10
Language • The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH. 1 Press MENU to access the MAIN MENU screen. MENU SLEEP T I MER V I DEO ADJ UST AUD I O SEL ECT CC CLOSED CAPT I ON PARENT CONTROL ES ENERGY SAVE SET UP 2 Press CH a/s to move the "E" mark to "SET UP". ( - Sharp MX-2610N | 36US50 Operation Manual - Page 11
skin tones purplish COLOR To increase color intensity To decrease color intensity BRIGHT To increase brightness To decrease brightness SHARP To increase sharpness To decrease sharpness COLOR TEMP. To choose a LOW, ML, MH or HIGH color tone. RESET To return all adjustments to factory - Sharp MX-2610N | 36US50 Operation Manual - Page 12
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.) • If stereo sound is difficult to hear. You can obtain clearer sound by manually switching to fixed monaural mode. 1 Press MENU to access the MAIN MENU screen. 2 Press CH a/s to move the "E" mark to "AUDIO SELECT - Sharp MX-2610N | 36US50 Operation Manual - Page 13
Audio Select (Continued) H AUDIO ADJUST When the "E" mark is at "AUDIO ADJUST", press VOL k/l to access the AUDIO ADJUST screen. To access the desired item, press CH a/s. To adjust the audio setting, press VOL k/l. TREBLE BASS BALANCE RESET Selected item TREBLE BASS BALANCE RESET VOL k button - Sharp MX-2610N | 36US50 Operation Manual - Page 14
. • Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are problems at the broadcast source. This does not necessarily indicate a problem with your TV. • If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED - Sharp MX-2610N | 36US50 Operation Manual - Page 15
Parent Control (V-CHIP Operation) H V-CHIP • This function allows you to restrict TV programs and also allows you to control TV usage based on FCC data. This function is to prevent your children from watching violence or sexual scenes that may be harmful. • Restriction of TV programs includes two - Sharp MX-2610N | 36US50 Operation Manual - Page 16
Parent Control (V-CHIP Operation) (Continued) • TV PARENTAL GUIDELINES (Example) Example 1.1 : Age Based setting Clear V s (block) from each "AGE" box for all ratings. This will automatically unblock everything. TV-Y TV-Y7 TV-G TV-PG TV-14 T V -MA AGE D L S V FV ---- - ---- ---- - - - - - - Sharp MX-2610N | 36US50 Operation Manual - Page 17
Parent Control (V-CHIP Operation) (Continued) • How to set V-CHIP [1] MPAA RATING VOLUME (k)/(l) 1 Press MENU to access the MAIN MENU screen. 2 Press CH a/s to move the "E" mark to "PARENT CONTROL". 3 Press VOL k/l to access the PARENT CONTROL screen. CHANNEL UP (a)/ DOWN (b) MENU MENU SLEEP T I - Sharp MX-2610N | 36US50 Operation Manual - Page 18
Parent Control (V-CHIP Operation) (Continued) 7 Press MENU, then "INPUT SECRET No." will be displayed. Note: • If SECRET No. is already set, skip to step 9. I NPUT SECRET No . ---- 8 Enter a 4-digit SECRET No. using the REMOTE KEYPAD. 123 456 789 ENTER 0 100 I NPUT SECRET No . 1234 9 When done - Sharp MX-2610N | 36US50 Operation Manual - Page 19
Parent Control (V-CHIP Operation)C(Conotnintiuneude)d) [3] Downloading additional rating mode There will be an additional new rating system. In that case, please set up as follows. Subsequently the new rating system will set up automatically. 1 Repeat steps 1 to 4 of [1] MPAA RATING. 2 Press CH a/s - Sharp MX-2610N | 36US50 Operation Manual - Page 20
Parent Control (V-CHIP Operation) (Continued) • How to set additional rating mode (Example) Once downloading is complete, you can set the blocking pattern as follows. 1 Repeat steps 1 to 4 of [1] MPAA RATING. 2 Press CH a/s to move the "E" mark to "Cdn. English Ratings", then press VOL k/l. → MPAA - Sharp MX-2610N | 36US50 Operation Manual - Page 21
Parent Control (V-CHIP Operation) (Continued) • Activating the V-CHIP BLOCK 1 Repeat steps 1 to 4 of [1] MPAA RATING. 2 Press CH a/s to move the "E" mark to "STATUS". Press VOL k/l to activate the V-CHIP BLOCK. (If STATUS is OFF, VCHIP BLOCK will not operate.) MPAA TV GU I DEL I NES → 3 Press - Sharp MX-2610N | 36US50 Operation Manual - Page 22
Parent Control (V-CHIP Operation) (Continued) • To change the V-CHIP BLOCK after registering a secret No. 1 Repeat steps 1 to 4 of [1] MPAA RATING, then "INPUT SECRET No." will be displayed. I NPUT SECRET No . ---- 2 Enter the 4-digit secret No. using the REMOTE KEYPAD and the V-CHIP select - Sharp MX-2610N | 36US50 Operation Manual - Page 23
Parent Control (VIEW TIMER) H VIEW TIMER This function allows you to restrict TV viewing time and also allows you to control TV usage. This function is to prevent your children from watching too much TV. VIEWING TIME (an accumulative timer: counts only the time duration while the TV power is on.) - Sharp MX-2610N | 36US50 Operation Manual - Page 24
Parent Control (VIEW TIMER) (Continued) 9 Enter the 4-digit secret No. using the REMOTE KEYPAD. 10 Press MENU, and secret No. is registered. 123 456 789 → ENTER 0 100 I NPUT SECRET No . 1234 Example: • To restrict anybody from watching TV for more than 5 hours, after watching the TV for 2 - Sharp MX-2610N | 36US50 Operation Manual - Page 25
Parent Control (VIEW TIMER) (Continued) • To cancel the VIEW TIMER setting or change the secret No. (If you forget the SECRET No.) 1 Repeat steps 1 to 4 of How to set VIEWTIMER. Press VOL k/l, and "INPUT SECRET No." will be displayed. 2 Press and hold both VOL k and CH a on the TV set simultaneously - Sharp MX-2610N | 36US50 Operation Manual - Page 26
Energy Save • This feature lets you lower the power consumption of your TV set which in turn saves you money and minimizes the impact on the environment. When this feature is turned on, it reduces the brightness of the TV to a level that consumes approximately 20 percent less energy than when the - Sharp MX-2610N | 36US50 Operation Manual - Page 27
Set Up H EZ Setup By operating the channel preset functions, you can preset your TV to the desired channels for viewing. 1 Press MENU to access the MAIN MENU screen. 2 Press CH a/s to move the "E" mark to "SET UP". → 3 Press VOL k/l to access the SET UP screen, then press CH a/s to move the "E" mark - Sharp MX-2610N | 36US50 Operation Manual - Page 28
Set Up (Continued) H Channel Setting If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channel. 1 Press MENU to access the MAIN MENU screen. 2 Press CH a/s to move the "E" mark to "SET UP". → MENU SLEEP T I MER V I DEO ADJ - Sharp MX-2610N | 36US50 Operation Manual - Page 29
Set Up (Continued) • Saving broadcast TV channels into memory 1 Press MENU to access the MAIN MENU screen, then press CH a/s to move the "E" mark to "SET UP". 2 Press VOL k/l to access the SET UP screen, then press CH a/s to move the "E" mark to "CH SETTING". 3 Press VOL k/l to access the CH SETTING - Sharp MX-2610N | 36US50 Operation Manual - Page 30
Set Up (Continued) 6 Press VOL k to add a channel to the TV memory or press VOL l to erase a channel from the TV memory. CH MEMORY AIR 10 VOL k To add channel 10 to the TV memory CH MEMORY AIR 10 ERASE ADD VOL l To erase channel 10 from (CH MEMORY the TV memory unmemorized channel) ERASE - Sharp MX-2610N | 36US50 Operation Manual - Page 31
Set Up (Continued) 6 Press MENU to exit. When the BLUE SCREEN is set to "ON" No signal Blue screen Power turns off automatically after 15 minutes Standby mode Note: • Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function despite the presence of a broadcast - Sharp MX-2610N | 36US50 Operation Manual - Page 32
Auto Input • The unit is preset to switch to the INPUT 2 screen automatically when VIDEO equipment is connected to the INPUT 2 terminal. Do the following to switch this feature off: 1 Press MENU to access the MAIN MENU screen. 2 Press CH a/s to move the "E" mark to "SET UP". → 3 Press VOL k/l to - Sharp MX-2610N | 36US50 Operation Manual - Page 33
Using the Video and Audio Input Terminals • Connecting video equipment for playback of video material. • To view video material from external video equipment, make sure to connect the equipment properly to the input terminals on the TV set. Connecting video device equipped with video output - Sharp MX-2610N | 36US50 Operation Manual - Page 34
unplug equipment connected to the S-VIDEO terminal. • It is the intent of SHARP that this product be used in full compliance with the copyright law of the on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used. • The connection cables/cords can - Sharp MX-2610N | 36US50 Operation Manual - Page 35
see if you can correct the trouble with a slight adjustment of the controls. QUICK SERVICE CHECK LIST PROBLEM No Playback of VCR and Disc OFF". (Dark and Blank Picture) Calling for Service For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies, - Sharp MX-2610N | 36US50 Operation Manual - Page 36
Specifications MODEL 36U-S50B Receiving System NTSC Stereo Broadcast MTS/SAP Reception Channels AIR VHF 2-13 ch UHF 14-69 ch CATV 1-125 ch Channel Tuning 181-channel Reception PLL tuning system Antenna Input Impedance VHF/UHF 75 ohm Unbalanced Screen Size 36˝ Diagonally Measured - Sharp MX-2610N | 36US50 Operation Manual - Page 37
garantizar al cliente la recepción puntual de cualquier notificación de seguridad sobre inspección, modificación o cancelación que se le pueda solicitar a SHARP bajo el Acta de seguridad de productos de consumidor de 1972. LEA CUIDADOSAMENTE LA CLÁUSULA "GARANTÍA LIMITADA" DE LA ÚLTIMA PÁGINA. ¿QU - Sharp MX-2610N | 36US50 Operation Manual - Page 38
materiales deberá ser considerando regulaciones ambientales. Para obtener información sobre el desecho o el reciclado, póngase en contacto con las autoridades locales o con Electronics Industries Alliance: www.eiae.org PRECAUCIÓN: No coloque el cable de alimentación de CA debajo del televisor u otro - Sharp MX-2610N | 36US50 Operation Manual - Page 39
relacionada con la conexión a tierra correcta del poste y la estructura de apoyo, la conexión a tierra del cable de entrada a una unidad de descarga, el tamaño de los conductores de conexión a tierra, la ubicación de la unidad de descarga de antena, la conexión a los electrodos de conexión a tierra - Sharp MX-2610N | 36US50 Operation Manual - Page 40
. RETORNO AL CANAL ANTERIOR (FLASHBACK) Para volver al canal anterior. AUMENTO/DISMINUCION DEL VOLUMEN (VOLUME UP/DOWN) (k) Aumenta el sonido. (l) Disminuye el sonido. • Cambia o selecciona los ajustes de TV en la visualización en pantalla. Ventanilla del transmisor de infrarrojos ENTRADA (INPUT - Sharp MX-2610N | 36US50 Operation Manual - Page 41
el problema. PROBLEMA El vídeo o el reproductor de discos de video no reproducen imágenes El equipo de video/audio externo no produce imágenes ni sonido El eléctrico externo con el funcionamento del televisor El de que el cable no el control de COLOR. X X XX X XX X X XX XX X XX X X Ajuste el el modo - Sharp MX-2610N | 36US50 Operation Manual - Page 42
les avantages client concernant la garantie des pièces, du service et des travaux applicable à votre achat. LA DEUXIEME - contrôle, de la modification ou du rappel de votre produit que SHARP peut être amené à fournir conformément à la loi de l'utilisateur que des instructions de fonctionnement et de - Sharp MX-2610N | 36US50 Operation Manual - Page 43
préconisées par la société Electronics Industries Alliance sur : www.eiae.org Ne placez pas cet équipement sur un chariot, un support ou une table instable. La télévision peut tomber et une tablette doit être réalisée conformément aux instructions du fabricant et à l'aide d'un kit de montage - Sharp MX-2610N | 36US50 Operation Manual - Page 44
PRÉCAUTIONS IMPORTANTES (Suite) 13. Respectez tous les avertissements et instructions mentionnés sur la télévision. 14. Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système d'antenne soit relié à la terre - Sharp MX-2610N | 36US50 Operation Manual - Page 45
Référence rapide sur les commandes • Nomenclature Panneau Avant (FRANÇAIS) PRISÉS D'ENTRÉE VIDÉO/ AUDIO IN 2 ALIMENTATION (POWER) Appuyer → Pour mettre sous tension. Appuyer de nouveau → Pour mettre hors tension. RÈGLAGE (MENU) Appuyer → Pour mettre sous tension. Appuyer de nouveau → Pour mettre - Sharp MX-2610N | 36US50 Operation Manual - Page 46
de remédier au problème par un simple réglage des commandes. PROBLEM Pas de reproduction d'un magnétoscope ou lecteur de disque Pas d'image titrage hors service. Appel au service après-vente (Image sombre et vide) Pour connaître l'emplacement du centre de service après-vente agréé Sharp le - Sharp MX-2610N | 36US50 Operation Manual - Page 47
CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the Sharp Authorized Servicer, call Sharp toll free at 1800-BE-SHARP. Contact your Sharp Authorized Servicer to obtain in-home service for this Product. The Servicer - Sharp MX-2610N | 36US50 Operation Manual - Page 48
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 Printed in Mexico TINS-A654WJZZ 03P04-MMG (J)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
COLOR TELEVISION
H
OPERATION MANUAL
H
MODEL
36U-S50
B
A
s an
E
NERGY
S
TAR
®
P
artner, SHARP has determined that this product meets the
E
NERGY
S
TAR
®
guidelines for energy efficiency.
E
NERGY
S
TAR
®
is a
U.S.
registered
trademark.
CONTENTS
PAGE
•
IMPORTANT INFORMATION/IMPORTANT
SAFEGUARDS
....................................................
2–4
•
Supplied Accessories
...............................................
5
•
Before Operating Your Television
..............................
5
•
Antenna Connections
...........................................
5, 6
•
Quick Reference Control Operation
.........................
7
•
EZ SETUP during First Use
.....................................
8
•
Demo Mode
..............................................................
9
•
Accessing the MAIN MENU screen without
Remote Control
........................................................
9
• Language
...............................................................
10
•
Sleep Timer
............................................................
10
•
Video Adjust
...........................................................
11
•
Audio Select
.....................................................
12, 13
MTS (Multichannel TV Sound)
............................
12
AUDIO ADJUST
.................................................
13
This operation manual includes basic operating
instructions in Spanish and French.
SPANISH is on page 37–41.
FRENCH is on page 42–46.
PAGE
•
Closed Caption
.......................................................
14
•
Parent Control
..................................................
15–25
V-CHIP Operation
.........................................
15–22
VIEW TIMER
................................................
23–25
•
Energy Save
...........................................................
26
•
Set Up
..............................................................
27–31
EZ Setup
.............................................................
27
Channel Setting
............................................
28–30
Blue Screen
..................................................
30, 31
•
Auto Input
...............................................................
32
•
Using the Video and Audio Input Terminals
......
33, 34
•
Before Calling for Service
.......................................
35
•
Calling for Service
..................................................
35
• Specifications
.........................................................
36
•
Limited Warranty
....................................................
47
A654 WJ