Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 104

BEFORE USING THE MACHINE Release the lock levers and open the main charger cover. 3 ☞ REPLACING THE TONER CARTRIDGES (page 1-52) (1) 4 (A) Remove the charger cleaner. (1) Flip down the charger cleaner lock (A) in the direction of the arrow, and lift the left end of (2) the charger cleaner. (2) Move the charger cleaner to the left and pull it out. Clean the main charger. (1) Gently push the charger cleaner all the way in. (2) Gently pull the charger cleaner out. (3) Repeat the above (1) to (2) three times. • Take care not to let the tip of the charger cleaner become soiled by toner. • Clean with the mark ( ) on the charger cleaner facing down. • Holes to be cleaned by the charger cleaner are indicated by labels similar to (A). 5 (A) • Do not use the charger cleaner for any purpose other than cleaning the main charger. Position of mark (2) 6 (1) Replace the charger cleaner in its original position. Insert the tip of the charger cleaner in toward the right and then press down on the end of the charger cleaner. The charger cleaner will lock into place. 1-63 Contents