Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 106

BEFORE USING THE MACHINE CLEANING THE BYPASS TRAY ROLLERS If you find that paper fed from the bypass tray misfeeds or is soiled by the roller, remove and clean the roller. If misfeeds or soiling continue to occur, replace the roller. Before starting, remove the paper from the bypass tray. Press the [POWER] key ( ) on the operation panel to turn off the panel 1 power, and then switch the main power switch to the off position. 2 Marks Remove the roller cover from the bypass tray. Place your fingers behind the pull straight toward you. marks on the roller cover and To clean the rollers, wipe each roller with a clean cloth. 3 Caution When cleaning the rollers, be careful not to injure your hands. Do not touch the surface of the roller if your hands are dirty. • When you replace roller, go to the next step. • If the dirt is difficult to remove, moisten the cloth with a small amount of water or neutral detergent, and then wipe with a clean, dry cloth until no moisture remains. Attach the roller cover on the bypass tray. 4 (1) (2) (1) Tilt the front of the cover slightly to attach it. (2) Press the cover onto the bypass tray so that it locks into place. 1-65 Contents