Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 187

COPIER ORIGINAL SIZES SPECIFYING THE ORIGINAL SIZE The original size is set in "Default original size setting" in the system settings (administrator), and the setting appears in the [Original] key. This section explains the procedure for specifying the setting when the original size is different from size shown in the [Original] key. Touch the [Original] key and perform the following. Specifying an inch original size (1) (2) Original OK (1) Touch the appropriate original size key. (2) Touch the [OK] key. 5½x8½ 8½x11 8½x13 Size Input 8½x14 8½x1325 Custom Size AB Inch None Specifying an AB original size (2) (1) (3) Original OK A5 B5 A4 Size Input 216x330 16K 216x340 216x343 Custom Size AB Inch None Original Original Exit Place 5½x8½ 8½x11 8½x13 Size Input (1) Upper Exit 8½x14 8½x1325 (2) Heavy Exit Check Size Card Size Custom Size OK AB Inch None (1) Touch the [AB Inch] key. (2) Touch the appropriate original size key. (3) Touch the [OK] key. With the MX-B402SC, touch the [Original] key to display the screen at left. (1) The original output destination for the automatic document feeder can be selected. (2) When a card size original is set in the automatic document feeder, the card size can be selected. 2-29 Contents