Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 196

COPIER MAKING COPIES USING THE BYPASS TRAY In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, and other special media. For detailed information on paper that can be loaded in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER" (page 1-27) in "1. BEFORE USING THE MACHINE". For precautions when loading paper in the bypass tray, see "LOADING PAPER IN THE BYPASS TRAY" (page 1-33) in "1. BEFORE USING THE MACHINE". Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Place the original in the automatic document feeder. ☞ PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER (page 1-37) 1 After placing the original, specify the original size. ☞ ORIGINAL SIZES (page 2-29) When placing the originals on the document glass... After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be copied black, causing excessive use of toner. Place paper in the bypass tray. Insert the paper with print side face down. 2 When loading paper larger than 8-1/2" x 11" or A4, be sure to pull out the bypass tray extension. Pull the bypass tray extension all the way out. If the bypass tray extension is not pulled all the way out, the size of the loaded paper will not be correctly displayed. Special Modes Touch the [Paper Select] key. Exposure Auto 3 1. 8½x11 2. 5½x8½ 3. 8½x14 4. 8½x11 Plain 8½x11 2-Sided Copy Output File Quick File Copy Ratio 100% Original Paper Select Auto 8½x11 Plain Preview 2-38 Contents