Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 202

COPIER ADDING MARGINS (Margin Shift) This function is used to shift the copy image right, left, up or down to adjust the margin. This is convenient when you wish to hole punch the copies. Shifting the image to the right so the copies can be bound at the left edge with a string Not using margin shift Using margin shift 1 1 1 1 The punch holes cut off The image is moved to part of the image allow space for the holes so the image is not cut off. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 1 Place the original in the automatic document feeder. ☞ PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER (page 1-37) After placing the original, specify the original size. ☞ ORIGINAL SIZES (page 2-29) Select the special modes. 2 (1) Touch the [Special Modes] key. (2) Touch the [Margin Shift] key. ☞ Special modes menu (1st screen) (page 2-41) (1) (2) (3) Special Modes Margin Shift Down 3 Right Left OK Cancel OK Side 1 1/2 (0~1) inch Side 2 1/2 (0~1) inch Up Set the margin shift. (1) Touch the margin shift position. Select one of the 4 positions. (2) Set the amount of the margin shift with . 0" to 1" (0 mm to 20 mm) can be entered. (3) Touch the [OK] key. You will return to the base screen of copy mode. 2-44 Contents