Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 417

FACSIMILE Place the original. Place the original in the document feeder tray or on the document glass as appropriate for the functions stored in the 1 program. When the original is a different size than the size setting, set the original size. ☞ SPECIFYING THE SCAN SIZE AND SEND SIZE (page 4-47) Select the special modes. 2 (1) Touch the [Special Modes] key. (2) Touch the [Program] key. ☞ SPECIAL MODES (page 4-71) 3 Program Program A Program C Program E Program G Program I Program K (1) Program B Program D Program F Program H Program J Program L (2) Retrieve the stored program. (1) Touch the desired program key. OK (2) Touch the [OK] key. 1 2 4 Program : Program C 0123456789 Scan Internet Fax Original Exposure Fax Scan: Auto USB Mem. Scan PC Scan 8½x11 Send: Auto Resolution Standard Address Review Special Modes File Quick File Auto Reception Fax Memory:100% Select additional settings. When a program is used, the following settings can be additionally specified: • Image settings: Original scan size*, send size • Special modes: Timer Transmission, Card Shot, File, Quick File, Own Name Select, Transaction Report * When stored in the program, this cannot be additionally specified. • The screen that appears will vary depending on the destination stored in the program. • The mode cannot be changed here. • Functions stored in the program cannot be canceled here. Press the [START] key. Scanning begins. • If you inserted the original pages in the document feeder tray, all pages are scanned. A beep will sound to indicate that scanning is finished. • If you are scanning the original on the document glass, scan each page one page at a time. 5 When scanning finishes, place the next original and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. A beep will sound to indicate that scanning is finished. To cancel scanning... Press the [STOP] key ( ). 4-74 Contents