Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 457

FACSIMILE RELAY REQUEST TRANSMISSION USING F-CODES This function is used to send a fax to a F-code relay broadcast memory box in another machine and have that machine relay the fax to multiple end receiving machines. When the end receiving machines are far from your machine, sending the fax to a relay machine that is close to the end receiving machines can help reduce phone charges. A relay request transmission can be used in combination with the timer transmission function to further reduce phone costs. ☞ SENDING A FAX AT A SPECIFIED TIME (Timer) (page 4-77) The machine Relay machine F-code relay broadcast memory box The fax is transmitted to each of the end receiving machines programmed in the F-code relay broadcast memory box. End receiving machines Transmission Transmission specifying a F-code Sub-address: AAAAAAAA Passcode: XXXXXXXX Box name: Sub-address: Passcode: BBBB AAAAAAAA XXXXXXXX End receiving machines are programmed in this box • Verify the F-code (sub-address and passcode) and end receiving machines programmed in the relay broadcast memory box in the relay machine before you perform a F-code relay request transmission. • Before this function can be used, the end receiving machines must be programmed in the F-code relay broadcast memory box in the relay machine. • The end receiving machines do not need to support F-code communication. • This function can be used in combination with a broadcast transmission or timer transmission. A F-code relay request transmission can also be stored in a program. • Your machine (the machine that requests a relay broadcast transmission) only bears the cost of sending the fax to the relay machine. The relay machine bears the cost of sending the fax to each of the end receiving machines. • When faxes forwarded using this function are printed at the forwarding destination, the date and time of reception cannot be printed on the faxes. ("Receiving Date & Time Print" is disabled.) System Settings: F-Code Memory Box (page 7-104) This is used to create memory boxes for F-code relay broadcast transmission. A memory box name, sub-address, passcode, and end receiving machines are programmed in each box. 4-114 Contents