Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 531

SCANNER/INTERNET FAX MX-B402: (1) Scan/Original Specify the scan size. (2) (1) Touch the appropriate original size key. OK (2) Touch the [OK] key. 5½x8½ 8½x11 8½x13 Size Input 8½x13 8½x14 Long Size MX-B402SC: (1) 3 Scan/Original Original Exit Place Original Size 5½x8½ 8½x11 8½x13 Upper Exit 8½x14 8½x13 Heavy Exit Check Size Long Size Size Input Card Size (2) AB Inch Specify the scan size. (3) (1) Touch the original output destination. OK (2) Touch the appropriate original size key. (3) Touch the [OK] key. AB Inch • If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long original. The maximum width that can be scanned is 19-5/8" (500 mm) (the maximum height is 8-1/2" (216 mm)). • To specify an AB size for the scan size, touch the [AB Inch] key to highlight the [AB] side and then specify the scan size. MX-B402-SC Only • In the situations below, the original exit place is fixed to the heavy exit. - When "Card Size" is selected - When the original guide is set to 2 7/8" (74 mm) or lower (Except when "Check Size" is selected) - When the automatic document feeder is scanning an original with an X (horizontal) value of 4 1/8" (105 mm) or less • When "Card Size" is selected, you cannot copy if the original guide is set to 2 7/8" (74 mm) or higher. 4 Scan/Original OK Scan Size 5½x8½ 100% Send Size Auto 2-Sided Booklet 2-Sided Tablet Image Orientation Touch the [OK] key. When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed. In addition, when only scan destinations are selected for scan transmission or metadata transmission, scanning will take place in Mono2. 5-58 Contents