Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 551

SCANNER/INTERNET FAX ERASING PERIPHERAL SHADOWS ON THE IMAGE (Erase) The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function does not detect shadows and will eliminate everything appearing in the erase area - including shadows, text and images.) Scanning a thick book Not using the erase function Using the erase function Erase modes Shadows appear here Edge Erase Shadows appear in the image. No shadows appear. Side Erase • Shadows at the edges of the original can also be erased when the automatic document feeder is used. • When using USB memory mode, connect the USB memory device to the machine before performing the procedure below. Place the original. Place the original face up in the document feeder tray, or face down on the document glass. 1 ☞ PLACING THE ORIGINAL (page 1-37) When the original is a different size than the size setting, set the original size. ☞ SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE (page 5-56) Specify the destination. ☞ ENTERING DESTINATIONS (page 5-18) 2 When scanning to USB memory, there is no need to specify the destination. Go to step 3. 5-78 Contents