Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 626

PERFORMING "Scan to HDD" DOCUMENT FILING Place the original. Place the original face up in the document feeder tray, or face down on the document glass. Placing the original on the document glass Portrait original Align the top edge of the original against the side of abc the document glass with 1 the scale. Landscape original Align the right side of the original against the side of the document glass with the scale. abc (4) (2) (1) (3) 2 COPY IMAGE SEND Ready to scan to HDD. Press [Start] to scan original. DOCUMENT FILING File Retrieve File Information Scan to HDD Original HDD Status Ex Data Access Scan: 8½x11 Store: Exposure Auto Resolution 200X200dpi Color Mode Mono2 Special Modes Auto Preview Switch to document filing mode and select Scan to HDD settings. (1) Touch the [DOCUMENT FILING] key. (2) Touch the [Scan to HDD] tab. If you do not wish to select settings, go to the next step. (3) Select the original size, exposure, resolution, color mode, and special modes. See ""Scan to HDD" SCREEN" (page 6-18). (4) Touch the [File Information] key. The settings are the same as for "File". See "FILE INFORMATION" (page 6-15). If the original is 2-sided, be sure to touch the [Original] key and then touch the [2-Sided Booklet] key or the [2-Sided Tablet] key as appropriate for the original. Press the [START] key. Scanning begins. For the procedure for placing the original, see step 4 of "SAVING A FILE WITH "Quick File"" (page 6-11). When Preview is enabled, the preview screen appears. 3 ☞ Checking the image before storing it (Preview) (page 6-22) A beep will sound to indicate that Scan to HDD is completed. To cancel scanning... Press the [STOP] key ( ). 6-23 Contents