Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 635

DOCUMENT FILING PRINTING A STORED FILE A file stored using document filing can be retrieved and printed when needed. The settings used when the file was stored are also stored, and thus the file can be printed again using those settings. The file can also be modified before printing by changing the print settings. After selecting the desired file, follow the steps below. ☞ SELECTING A FILE (page 6-30) 1 Job Settings file-01 Select the job. Print Move Name 1 8½x11 Cancel Mono2 Send Delete Property Change Image Check Detail Touch the [Print] key. 2 Job Settings / Print file-01 Name 1 8½x11 Cancel Mono2 Paper Select Auto Output 2-Sided Special Modes Number of Prints 1 (1 999) Print and Delete the Data Print and Save the Data Touch the [Print and Delete the Data] key or the [Print and Save the Data] key. If the [Print and Delete the Data] key is touched, the files will be automatically deleted after printing. If the [Print and Save the Data] key is touched, the files will be saved after printing. Output settings, 2-sided printing, special modes, the number of copies, and other settings can be selected. For more information, see "PRINT SETTINGS SCREEN" (page 6-33). • When a long size document is stored from Scan to HDD or scan mode, the file cannot be printed. A file stored from scan mode that included fax mode or Internet fax mode destinations in a broadcast transmission can be printed. • If print settings are changed when a stored file is printed, the only changed setting that can be stored is the number of copies. • The printing speed may be somewhat slow depending on the resolution and exposure mode settings of the stored file. 6-32 Contents