Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 794

TROUBLESHOOTING Problem Printing does not take place. Point to check Is the IP address selected correctly? (Windows) Are you using a printer port created using Standard TCP/IP Port? (Windows 2000/XP/Server 2003/Vista/ Server 2008/7) Is "Connect via" set to [Ethernet] for AppleTalk? (Mac OS 9.0-9.2.2) Is your computer in an unstable state? Is the machine specified correctly in the software application that you are using for printing? Are the network connection devices operating normally? Solution Check the IP address setting. If the machine does not have a permanent IP address (the machine receives an IP address from a DHCP server), printing will not be possible if the IP address changes. Print the "All Custom Setting List" in the system settings and check the IP address of the machine. If the IP address has changed, change the port setting in the printer driver. ➞ System Settings > "List Print (User)" > "All Custom Setting List" ☞ Start Guide If the IP address changes frequently, it is recommended that a permanent IP address be assigned to the machine. ➞ System Settings (Administrator) > "Network Settings" Check the settings of your computer. When a port created with Standard TCP/IP Port in Windows is used and the [SNMP Status Enabled] checkbox is , it may not be possible to print correctly. Change the [SNMP Status Enabled] checkbox to . ☞ 1. BEFORE USING THE MACHINE "Software Setup Guide" Open [AppleTalk] from the [Control Panels] and make sure that [Ethernet] is selected in the "Connect via" menu. Printing is not possible if [Ethernet] is not selected. Restart your computer. Printing is sometimes not possible when running multiple applications at once, or there is insufficient memory or hard drive space. Make sure that the printer driver of the machine is selected in the Print window of the application. If the printer driver does not appear in the list of available printer drivers, it may not be installed correctly. Remove the printer driver and then install it once again. ☞ 1. BEFORE USING THE MACHINE "Software Setup Guide" Make sure that the routers and other network connection devices are operating correctly. If a device is not powered on or is in an error state, see the manual of the device to correct the problem. 8-23 Contents