Sharp MX-B402 MX-B402 MX-B402SC Operation Manual - Page 97

BEFORE USING THE MACHINE Correct position Incorrect position Release the used toner collection container. (1) Make sure that the part indicated in the illustration has stopped in the correct position. After machine operation stops suddenly due to a power outage or other reason, the part will stop in the correct position unless an attempt was made to remove the toner collection container. If the part has not stopped in the correct position, close the front cover, turn on the power, and then follow the correct procedure to turn off the power. After the power has been turned off correctly, start again from step 1. 2 (2) Turn the toner collection container lock lever to the right until it is horizontal. (3) Tip the toner collection container forward. Grasp the top right of the toner collection container with your right hand and support the bottom left with your left hand, and slowly tip the container toward you. Remove the toner collection container. 3 • If the toner collection container is tipped forward too far, it will not be possible to remove it. • Do not point the holes down as used toner will spill out. • Hold the container by both hands and lift it up slowly. • Do not discard the toner collection container. Place it in a plastic bag and keep it until your service technician comes to perform maintenance. Your service technician will collect the toner collection container. 1-56 Contents