Sharp MX-M200D Operation Manual - Page 20

BEFORE USING THE PRODUCT Default settings The machine is set at the factory to return all settings to the default settings one minute after a copy job is finished (auto clear function) or when the [CA] key is pressed. When the settings return to the default settings, any functions that were selected are cancelled. The auto clear time can be changed in the system settings. (Page 83) In the default state the display shown below appears. The default state of the display may vary depending on settings in the system settings. Ready to copy. A4 AUTO 100% A4 AUTO *The screen is that of the MX-M200D. LOADING PAPER The message "TRAY< >:Add paper." will be displayed when there is no copy paper in the selected paper tray. (< > is the tray number.) Load paper in the indicated paper tray. PAPER The specifications for the types and sizes of paper that can be loaded in the paper trays are shown below. Paper tray Tray 1 Tray 2 Tray of 250-sheet paper feed unit Tray of 2 x 250-sheet paper feed unit Bypass tray Tray No.*4 Paper type Paper size Weight Capacity 1 2 2 or 3 2 or 3 3 or 4 A5*1, B5, B5R, A4, A4R, B4, A3 (5-1/2" x 8-1/2"*1 (Invoice), Standard paper 8-1/2" x 11" (Letter), 8-1/2" x 56 g/m2 to 90 g/m2*2 Recycled paper 11"R, 8-1/2" x 13" (15 lbs. to 24 lbs.)*2 (Foolscap), 8-1/2" x 14" (Legal), 11" x 17" (Ledger)) 250 sheets (80 g/m2 (20 lbs.))*3 (Load paper lower than the line on the tray) Standard paper Recycled paper A6R to A3 (5-1/2" x 8-1/2" (Invoice) to Transparency film 11" x 17" (Ledger)) Labels 56 g/m2 to 90 g/m2 (15 lbs. to 24 lbs.) 100 sheets*3 Load one sheet of these papers at a time to the bypass tray. Thick paper*5 A6R to A4 (5-1/2" x 8-1/2" (Invoice) to 8-1/2" x 11" (Letter)) 129 g/m2 to 200 g/m2 (33 lbs. to 110 lbs. *6) Load one sheet of paper each time on the bypass tray. 106 g/m2 to 128 g/m2 (28 lbs. to 33 lbs.) You can load multiple sheets of paper on the bypass tray. A6R to A3 (5-1/2" x 8-1/2" (Invoice) to 11" x 17" (Ledger)) 91 g/m2 to 105 g/m2 (24 lbs. to 28 lbs.) You can load multiple sheets of paper on the bypass tray. Envelopes International DL (110 mm x 220 mm), International C5 (162 mm x 229 mm) Commercial 10 (4-1/8" x 9-1/2") 5 sheets *1 A5 (5-1/2" x 8-1/2") can be used in tray 1 but cannot be used in other trays (including trays in optional paper feeding unit). *2 When making a large number of copies or prints using 90 g/m2 (24 lbs.) paper, remove the output from the paper output tray when about 100 pages have been printed. The output may not stack correctly if more than 100 pages are allowed to accumulate. *3 The number of sheets of the paper which can be set changes with the weight of a paper. (The indicated numbers are for 80 g/m2 (20 lbs.) paper.) *4 The trays are numbered 1, 2, 3, and 4 from the top. *5 To use thick paper, a setting that is suitable for thick paper must be selected (page 20). *6 Index Paper that can be used for automatic 2-sided printing Paper used for automatic two-sided printing must meet the following conditions: Paper type: Plain paper (special paper cannot be used.) Paper size: Standard sizes (A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R) Paper weight: 56 g/m2 to 90 g/m2 (15 lbs. to 24 lbs.) 18