Sharp MX-M200D Operation Manual - Page 32
Misfeed In The Bypass Tray
View all Sharp MX-M200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
TROUBLESHOOTING AND MAINTENANCE Section C Remove the misfed original from the exit area. If the misfed original cannot be easily removed from the exit area, open the moveable part of the document feeder tray and remove the original. 2 Open and close the SPF to make the misfeed location indicator stop blinking. You can also make the misfeed indicator stop blinking by opening and closing the feeding roller cover or the right side cover. 3 Return the originals indicated by the minus number in the display to the document feeder tray and press the [START] key ( ). Copying will resume from the originals that still remained when the misfeed occurred. Note Depending on the location of the misfeed, the displayed number of originals to be returned to the document feeder tray may not be correct. MISFEED IN THE BYPASS TRAY 1 Carefully remove the misfed paper from the bypass tray. 2 Grasp the side cover handle and gently open and close the side cover. The message " Clear paper path." will be cleared and copying will be possible. Note If the message does not clear, check again to make sure that no pieces of paper remain. 30