Sharp MX-M200D Operation Manual - Page 33
Misfeed In The Machine
View all Sharp MX-M200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
TROUBLESHOOTING AND MAINTENANCE MISFEED IN THE MACHINE To remove a paper misfeed from the machine, the bypass tray and then the side cover must be opened. Check whether the misfeed occurred in A, B, or C below and then follow the misfeed removal procedure for that location. 1 Open the bypass tray and then the side cover. 2 Determine where the misfeed occurred. Location C If paper is misfed here, go to "Misfeed in C" (page 33). Location B If paper is misfed here, go to "Misfeed in B" (page 32). 2 Location A If paper is misfed here, go to "Misfeed in A" (below). Misfeed in A 1 Open the front cover. Push gently on both ends of the front cover to open it. 3 Close the front cover and the side cover. The message " Clear paper path." will be cleared and copying will be possible. 2 Turn the roller rotating knob in the direction of the arrow to remove the misfed paper. Roller rotating knob Be careful not to tear the misfed paper during removal. Note • When closing the front cover, gently hold both ends. • When closing the side cover, hold the handle. • If the message does not clear, check again to make sure that no pieces of paper remain. Warning The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or injury. Caution Do not touch the photoconductive drum (green portion) when removing the misfed paper. Doing so may damage the drum and cause smudges on copies. 31