Sharp MX-M200D Operation Manual - Page 34
Misfeed in B
View all Sharp MX-M200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
TROUBLESHOOTING AND MAINTENANCE Misfeed in B 1 Open the front cover. Push gently on both ends of the front cover. 4 Lift the fusing unit release levers. 2 Turn the roller rotating knob in the direction of the arrow. Roller rotating knob 5 Close the front cover and the side cover. The message " Clear paper path." will be cleared and copying will be possible. 3 Lower the right and left fusing unit release levers and remove the misfed paper. Fusing unit release levers Be careful not to tear the misfed paper during removal. Note • When closing the front cover, gently hold both ends. • When closing the side cover, hold the handle. • If the message does not clear, check again to make sure that no pieces of paper remain. Warning The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or injury. Caution • Do not touch the photoconductive drum (green portion) when removing the misfed paper. Doing so may damage the drum and cause smudges on copies. • Take care not to allow unfixed toner on the misfed paper to soil your hands or clothes. 32