Sharp MX-M200D Operation Manual - Page 63
Two-sided Copies Using The, Bypass Tray
View all Sharp MX-M200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
TWO-SIDED COPIES USING THE BYPASS TRAY Follow the steps below to perform two-sided copying manually. Example: Copying original A and original B onto both sides of the paper 1 2 1 If you are using the MX-M160D/MX-M200D The MX-M160D/MX-M200D is equipped standard with an automatic two-sided copying function that automatically turns over the paper. If paper in "Paper that can be used for automatic 2-sided printing" on page 18 is used, this enables easier two-sided copying than using the bypass tray. See "TWO-SIDED COPYING" on page 56. 1 Copy original A. Copy of original A Original A 3 Turn the copy of original A over, and without changing the position of the edge closest to you, insert it in the bypass tray. Insert the paper all the way in. 1 Original B 2 1 Copy of original A 4 1 1 1 1 2 1 1 2 2 Copy of original A Original A 2 Place original B as shown below. Original B Vertically-oriented original: If the original is oriented vertically, place it in the same orientation as original A. Original B Horizontally-oriented original: Place in the opposite orientation (rotated 180 degrees) to that of original A. Original B Copy of original A Note • Copies made on the back side of paper should always be made one sheet at a time using the bypass tray. • Straighten curled or wavy paper before using it. Curled paper may cause misfeeds, creases, or a poor-quality image. 4 Select the bypass tray with the [PAPER SELECT] key and then press the [START] key ( ). The copies are delivered to the centre tray. 61