Sharp MX-M200D Operation Manual - Page 75
Appendix
View all Sharp MX-M200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
6 APPENDIX SPECIFICATIONS Name Digital Multifunctional System MX-M160/MX-M160D MX-M200D Type Desktop Photoconductive type OPC drum Document glass type Fixed Copy system Laser electrostatic method Originals Sheets, bound documents, max. original size A3 (11" x 17") Copy sizes Max. A3 (11" x 17"), min. A5 (5-1/2" x 8-1/2") (A5 (5-1/2" x 8-1/2") can only be fed from tray 1 and the bypass tray) Image loss: Max. 4 mm (5/32") at top edge and bottom edge, combined maximum of approximately 6 mm (11/64") Copying speed 9 copies/min. 10 copies/min. 11 copies/min. 12 copies/min. 14 copies/min. 16 copies/min. A3 (11" x 17") B4 (8-1/2" x 14") 8-1/2" x 13" A4R (8-1/2" x 11"R) B5R A4, B5, A5 (8-1/2" x 11", 5-1/2" x 8-1/2") 10 copies/min. 11 copies/min. 12 copies/min. 14 copies/min. 15 copies/min. 16 copies/min. 20 copies/min. 11" x 17" A3 B4 (8-1/2" x 14", 8-1/2" x 13") A4R 8-1/2" x 11"R B5R A4, B5, A5 (8-1/2" x 11", 5-1/2" x 8-1/2") Continuous copying 1-999 copies (decrement type) (can be changed to 1- 99 in the system settings) First-copy time*1, *2 Approx. 7.2 s Warm-up time*2 Approx. 45 sec. Copy ratios Variable: 25% to 400%, in 1% increments (total 376 steps) (50% to 200% when the SPF is used) Fixed preset: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200%, 400% (25%, 50%, 64%, 77%, 95%, 100%, 121%, 129%, 141%, 200%, 400%) (25% and 400% only when the SPF is used) Paper feeding One automatic feeding paper tray (250 sheets) + bypass tray (100 sheets) Two automatic feeding paper trays (250 sheets each) + bypass tray (100 sheets) Fusing system Heat rollers Developer system Dry development Resolution Scanning: 600 x 300 dpi, output: 600 x 600 dpi (AUTO/TEXT mode) Scanning: 600 x 600 dpi, output: 600 x 600 dpi (PHOTO mode) Gradation Scanning: 256 halftones, printing: 2 halftones Power supply Local voltage ±10% (For this machine's power supply requirements, see the name plate located on the back of the machine.) Power consumption Max. 1.2 kW *1 Measured when copying is started after warm-up following power on, using the document glass. (Exposure set to "AUTO". "RESOLUTION IN AUTO/TEXT MODE" set to 300 dpi and "WAITING COPY LAMP SETTING" set to "ON" in the system settings. Paper fed from tray 1 on machine, A4 (8-1/2" x 11") original and paper oriented horizontally, no reduction or enlargement.) *2 May vary depending on machine operating conditions and ambient conditions such as power voltage and humidity. 73