Sharp MX-M200D Operation Manual - Page 86

SYSTEM SETTINGS GUIDE Select "MESSAGE TIME" and press the [OK] key. The following screen will appear. MESSAGE TIME SHORT (3 sec.) NORMAL (6 sec.) LONG (9 sec.) 1 Select the desired display time with the [ ] or [ ] key. 2 Press the [OK] key. KEY TOUCH SOUND This program is used to set the volume of the key touch sound that is heard each time a key is pressed. The initial factory setting is "SHORT". Select "KEY TOUCH SOUND" and press the [OK] key. The following screen will appear. KEY TOUCH SOUND OFF SHORT LONG 1 Select the desired volume with the [ ] or [ ] key. To turn the key touch sound off, select "OFF". 2 Press the [OK] key. KEYS TOUCH SOUND AT INITIAL POINT This program is used to select whether or not a beep will sound at preset base settings as you press a key to select a setting. The factory default setting is no beep. If you would like a beep to sound, select "KEYS TOUCH SOUND AT INITIAL POINT" and press the [OK] key so that a checkmark appears in the checkbox. If you would not like a beep to sound, select "KEYS TOUCH SOUND AT INITIAL POINT" once again and press the [OK] key so that the checkmark is cleared from the checkbox. KEY PRESS TIME This program is used to set the duration of time that a key must be pressed to take effect. A longer setting can be selected to prevent keys pressed accidentally from taking effect. Keep in mind, however, that when a longer setting is selected more care is required when pressing keys to ensure that the key input is registered. The initial factory setting is "MINIMUM". Select "KEY PRESS TIME" and press the [OK] key. The following screen appears. KEY PRESS TIME MINIMUM 0.5 sec. 1.0 sec. 1.5 sec. 1 Select the desired time with the [ ] or [ ] key. 2 Press the [OK] key. DISABLE AUTO KEY REPEAT This program is used to stop a setting from changing continuously when the [ ] or [ ] key is held down, such as when setting the zoom ratio or the original size (auto key repeat will not operate). When this program is enabled, a key must be pressed repeatedly instead of holding it down. Auto key repeat is initially set to operate (factory default setting). To disable auto key repeat, select "DISABLE AUTO KEY REPEAT" and press the [OK] key so that a checkmark appears in the checkbox. To re-enable auto key repeat, select "DISABLE AUTO KEY REPEAT" once again and press the [OK] key so that the checkmark is cleared from the checkbox. DISABLE PAPER SIZE SET This program is used to disable "PAPER SIZE SET" in the special functions menu. When disabled, "PAPER SIZE SET" cannot be used when the [SPECIAL FUNCTIONS] key is pressed, which prevents users other than the administrator from easily changing the paper size setting. "DISABLE PAPER SIZE SET" is initially disabled (factory default setting). 84