Sharp MX-M200D Operation Manual - Page 97
Administrator Password, Number: Factory Setting
View all Sharp MX-M200D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
ADMINISTRATOR PASSWORD NUMBER: FACTORY SETTING The following is the factory setting of the Administrator Password Number, which must be used to access the System Settings. Factory setting = 00000 This number must be entered when accessing the System Settings for the first time. (Page 76) Note • The Administrator Password Number is an important security number allowing the Administrator to configure the copier's functions and auditor's settings. • You should register your own code number - different from the factory setting above - immediately after your copier is installed. • Detach this page and store it in a safe place. ✂ 95
95
✂
ADMINISTRATOR PASSWORD
NUMBER: FACTORY SETTING
The following is the factory setting of the Administrator Password Number, which must be used to access the
System Settings.
Factory setting = 00000
This number must be entered when accessing the System Settings for the first time. (Page 76)
•
The Administrator Password Number is an important security number allowing the Administrator to
configure the copier's functions and auditor's settings.
•
You should register your own code number – different from the factory setting above – immediately after
your copier is installed.
•
Detach this page and store it in a safe place.
Note