Sharp MX-M450N Operation Manual - Page 22

MAIN FEATURES Hole punching See page 3-17 Copies can be punched to add holes. Original Punch positions * When the saddle stitch finisher and punch module are installed. Document filing function See CHAPTER 7 A document image can be stored on the hard disk. A stored file can easily be called up and printed or transmitted. Document Image Save to machine's hard disk HDD Printed Call up a Transmitted saved file to reuse * MX-M350N/MX-M450N, or when the document filing function has been added Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efficiency. Achieves ENERGY STAR energy savings; product fully qualifies when used with a duplexer. The Environmental Choice Program guidelines are applied to the products only in Canada. The products that meet the Environmental Choice Program guidelines carry the logo shown to the left. The products without the logo may not meet the Environmental Choice Program guidelines. Energy saving features This product has the following two power reducing modes to help conserve natural resources and reduce environmental pollution. Preheat mode When the machine remains in the standby state for the amount of time set in the administrator settings, preheat mode automatically reduces the temperature of the fusing unit to save power while the machine is on standby. When a fax or print job is received, or keys are pressed on the operation panel, or an original is placed for a copy, fax, or network scanner job, preheat mode automatically turns off. Auto power shut-off mode The auto power shut-off mode is the second level of power reduction. In this mode power is shut off to the fusing unit and the touch panel. In this state more energy is saved than in the preheat mode but the time to recover to the ready condition will be longer. The preset time to enter this mode can be set by a administrator setting. When this product is used as a printer, and either of the above modes is active, the mode will be deactivated automatically by an incoming job and the machine will automatically warm up and start to print when it has reached the ready temperature. When this product is configured for multi-function operation, and either of the above modes is active, the mode will be deactivated as above by an incoming print job. Either mode will also be deactivated by operation of DOCUMENT FILING, IMAGE SEND or COPY mode key. 1-8