Sharp MX-M450N Operation Manual - Page 43

LOADING PAPER Loading paper in the stand/MPD & 2000 sheet paper drawer Upper paper tray: The upper paper tray is equivalent to the multi purpose drawer. The method of loading paper and the paper that can be used are the same as for the multi purpose drawer. Refer to the description of the multi purpose drawer (see page 2-8). Lower paper tray: The lower paper tray is a large capacity tray that holds 2,000 sheets of 8-1/2" x 11" or A4 paper (20 lbs. (80 g/m2)). Use the following procedure to load paper in the large capacity tray. NOTE 2 If the paper size or paper type is changed in either paper tray, the tray settings must be changed in system settings. Refer to "Setting the paper type and paper size" on page 2-5. 1 Pull out the large capacity tray. Gently pull the tray out until it stops. 3 Gently push the large capacity paper tray into the machine. Push the tray firmly all the way into the machine. 2 Load paper onto the right and left paper feed tables. Load paper onto the right paper feed table. The right table holds approximately 1,200 sheets. Raise the paper guide and load paper onto the left paper feed table. The left table holds approximately 800 sheets. After loading paper, be sure to return the paper guide. 4 Set the paper type. If you have changed the paper size from the AB system to the inch system or vice versa, select the relevant type referring to "Setting the paper type and paper size" on page 2-5. 5 Loading paper in the stand/MPD & 2000 sheet paper drawer is now complete. Specifications (stand/MPD & 2000 sheet paper drawer) Name Paper size/weight Paper capacity (ordinary paper) Dimensions Weight Stand/MPD & 2000 sheet paper drawer See specifications of paper trays on page 2-3. Upper tray: 500 sheets (20 lbs. (80 g/m2)), Lower tray: 2,000 sheets (20 lbs. (80 g/m2)) 23-3/16" (W) x 24-51/64" (D) x 15-29/32" (H) (589 mm (W) x 630 mm (D) x 404 mm (H)) Approximately 75 lbs. or 34 kg 2-11