Sharp MX-M450N Operation Manual - Page 50

MISFEED REMOVAL Misfeed in the transport area, fusing area, and exit area CAUTION The fusing unit is hot. Take care in removing paper. (Do not touch the metal parts.) 1 Unlatch the duplex module and slide it to the left. Unlatch the module and gently move the module away from the machine. If the machine is not equipped with a duplex module, open the side cover similarly. 2 Remove the misfed paper as shown in the illustrations below. Roller rotating knob A If paper is misfed in the transport area, turn roller rotating knob A in the direction of the arrow to remove the misfed paper. Roller rotating knob B oIf paper is misfed in the fusing area, turn roller rotating knob B in the direction of the arrow to remove the misfed paper. CAUTION The fusing unit is hot. Take care in removing paper. (Do not touch any metal parts.) Fusing unit open tab If the misfed paper is inside the fusing area, turn down the fusing unit open tab to open the fusing unit and remove the misfed paper. If paper is misfed in the exit area, remove it as shown while taking care not to tear the paper. NOTE Do not touch or damage the transfer roller. Transfer roller Photoconductive drum Do not touch or damage the photoconductive drum. If the duplex module is equipped with an exit tray and paper is misfed in the exit area, remove the misfed paper as shown in the illustration. 3 Gently close the duplex module. If the machine is not equipped with a duplex module, close the side cover. After closing, confirm that the misfeed message is cleared and the normal display appears. 2-18