Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 103

BEFORE USING THE MACHINE SPECIFICATIONS Name Inserter (MX-CF10) Paper weight 16 lbs. to 68* lbs. (60 to 256 g/m2) *For index paper, equivalent to 140-lbs. Paper types Plain paper, special paper (transparency film, colored paper, paper with punch holes, tabbed paper, etc.) (Consult your retailer for more information on special papers that can be used.) Paper size 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, A3, B4, A4, A4R, B5, B5R, A5R, 8K,16K,16KR Paper capacity Max. 100 (20 lbs. (80 g/m2)) Paper conveying Center reference Power supply Supplied from machine Dimensions When paper tray is folded up: 11-15/64" (23-5/8"*) (W) 22-61/64" (D) 43-13/16" (H) (285 (600*) mm (W) x 583 mm (D) x 1113 mm (H)) Not including stopper (1-37/64"(40 mm)) when attached to machine * Including paper tray Weight Approx. 55 lbs. (Approx. 25 kg) Specifications are subject to change for improvement without notice. LOADING PAPER When loading paper in the inserter, load the paper face up. If the paper has a top edge and bottom edge, load in the same top-bottom orientation as the original. Adjust the paper guide on the paper tray to the width of the paper. When using tabbed paper, place the paper as follows: Load the paper back side up. The top side is inserted first. Back side The relation of copies and tabbed sheets is shown below. Load tabbed paper Copy Back side Inserted first. Back side Back side 4th sheet 1st sheet Copy result 1st sheet 2nd sheet 3rd sheet 4th sheet 5th sheet Back side 5th sheet Tabbed paper 4th sheet (back side) Tabbed paper 1st sheet (back side) 1-62 Contents