Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 104

BEFORE USING THE MACHINE MANUAL OPERATION OF THE INSERTER The inserter can be used for stapling or punching without performing a copy operation. These functions are selected at the operation panel of the inserter. (1) (2) (3) (1) [PUNCH] key When a punch module is installed on the finisher or saddle stitch finisher, punch holes can be added to blank paper or printed paper. The indicator lights when this function is selected. (2) [STAPLE] key/indicator When this function is selected, each set of output is stapled and delivered to the finisher or saddle stitch finisher tray. (Note that the sets are not offset.) Press this key until the icon light of the desired staple position lights up. (" " pamphlet stapling can only be selected when a saddle stitch finisher is installed) (3) [START] key/indicator After selecting punch or staple settings with key (1) or key (2), place the paper to be punched or stapled on the inserter tray and press this key. • Do not use tabbed paper when operating the inserter manually. • The punching and stapling functions cannot be used when the finisher or saddle stitch finisher has failed, or when the functions are prohibited* in the administrator settings (7. SYSTEM SETTINGS "Enable/Disable Settings" (page 7-45)). * Disabling of stapler/Disabling of punch/Disabling of finisher/Disabling of inserter 1-63 Contents