Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 146
Changing The Port
View all Sharp MX-M623 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
BEFORE USING THE MACHINE CHANGING THE PORT When using the machine in a Windows environment, follow the steps below to change the port when you have changed the IP address of the machine or have installed the PC-Fax driver when the machine is connected with a USB cable. If the machine is being used on an IPv6 network, follow the steps 1 to 3 below and see "Changing to a Standard TCP/IP Port" (page 1-107) for the remaining steps of the procedure to change the port. Click the [Start] button ( ), click [Control Panel], and then click [Printer]. • In Windows XP/Server 2003, click the [start] button and then click [Printers and Faxes]. 1 • In Windows 2000, click the [Start] button, select [Settings], and then click [Printers]. If [Printers and Faxes] does not appear in the [start] menu in Windows XP, click the [start] button, click [Control Panel], click [Printers and Other Hardware], and then click [Printers and Faxes]. Open the printer properties window. 2 (1) Right-click the printer driver icon of the machine. (2) Select [Properties]. Adding or changing a port. (1) Click the [Ports] tab. (2) Click the [Add Port] button. 3 (2) (1) To change to a previously created port such as USB port, select the desired port (USB001, etc.) from the list and click the [Apply] button. This changes the port. 1-105 Contents