Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 196

COPIER Stapling positions Saddle stitch (only with saddle stitch finisher) Vertically-oriented paper Saddle stitch cannot be used when the paper is oriented vertically Horizontally-oriented paper Applicable paper sizes 8-1/2" x 11"R, A3, B4, A4R, 8K Number of sheets that can be stapled: Max. 30 sheets*2 *1 When the top left corner or the bottom left corner of the paper is stapled in one place, the staple is placed diagonally, except in the following cases (Diagonal stapling): • When the top left corner of the paper is stapled in one place when using the following paper sizes: 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R, and A4R. *2 Two sheets (one sheet when pamphlet stapling is performed) of paper up to 68 lbs. (256 g/m2) can be stapled as covers. When this is done, the number of sheets that can be used is two less (one less for saddle stitch) than the stated maximum. • The number of sheets that can be stapled at once includes any covers and/or inserts that are inserted. • When Mixed Size Original in the special modes is used with the "Same Width" setting, the maximum number of sheets that can be stapled is 25 for a saddle stitch finisher or 30 for a finisher regardless of the paper size. • The saddle stitch function can only be used when a saddle stitch finisher is installed. 2-36 Contents