Sharp MX-M623 MX-M623 MX-M753 Operation Manual - Page 406

FACSIMILE BASIC TRANSMISSION METHODS This section explains the basic procedures for sending a fax. TRANSMISSION METHODS The methods that can be used to send a fax from the machine are explained below. Select the method that best suits your needs. When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed, the destination cannot be changed, and destinations cannot be added. If you wish to change the mode or destination, touch the [Cancel] key in the touch panel and then follow the procedure below. When "Default Address Setting" is set to "Apply E-mail address of the user for login.", pressing the [Add Address] key on the touch panel switches modes and adds addresses. To fax a large number of sheet originals, use the automatic document feeder. The originals will be scanned into memory and then transmitted (memory transmission). When memory transmission is selected and multiple originals are placed in the automatic document feeder (and the line is free), transmission will begin as soon as the first page is scanned and will take place while the remaining pages are being scanned (Quick Online transmission). If transmission cannot begin immediately because the line is in use, all pages will be scanned into memory and the transmission will be reserved. ☞ USING THE AUTOMATIC DOCUMENT FEEDER FOR TRANSMISSION (page 4-32) When a fax transmission or reception is already in progress, the following procedure can be performed to reserve a transmission job. To check reserved transmission jobs, display the job status screen. ☞ CHECKING THE STATUS OF FAX JOBS (page 4-126) 11111 Transmission 11111 1 4-25 Contents